PANEL SHEET BOLT TYPE · WALL & CEILING

Screw-Fixed Ceiling & Shallow Wall Profile ST-850PN (Bolt Type)

Starting Price:

75-290 THB/m

Thickness

Starting at 0.25 mm thickness

** Prices are subject to change. Please check with your nearest branch before ordering.

FEATURES

Key Features and Recommended Pitch Suitability of ST-850PN Profile

1.The PN-850 steel ceiling and wall panel profile features a rib height of 4 mm and an effective cover width of 850 mm. Its shallow rib design offers a sleek, elegant, and modern aesthetic as an alternative to flat sheets for ceilings, partition walls, factory doors, and wall cladding, suitable for both interior and exterior applications.
2.The PN-850 profile features ribs running along its entire length to enhance rigidity, and its wide effective width allows for versatile installation in both vertical and horizontal orientations; however, PN-850 should not be used as roofing material.
3.Installation requires verifying level purlin alignment; framing stud spacing should typically not exceed 0.50 m (50 cm), depending on the metal sheet thickness.
4.Sheets join seamlessly with smooth, flush, and tightly fitting laps for a clean visual finish.
5.Installation uses a screw-fixed system (BOLT TYPE) with 16 mm fasteners.